Table of Contents
Advertisement
continuous stain (main charger section):
Vol. 2 7–106
flaws on drum are developed: Vol. 2 7–108
periodic toner stains: Vol. 2 7–124
scattered toner on printout: Vol. 2 7–110
stains appear across entire printout: Vol. 2
7–114
stains in white background: Vol. 2 7–122
stains on printout (separation charger
section): Vol. 2 7–118
transfer failure in areas of printout (transfer
charger): Vol. 2 7–132
uneven density along width of printout:
Vol. 2 7–116
voids in areas of printout: Vol. 2 7–128
Schedule
cleaning
service provider responsibility: Vol. 2
6–10
user responsibility: Vol. 2 6–8
replacement
service provider responsibility: Vol. 2
6–10
user responsibility: Vol. 2 6–9
Schedules, maintenance: Vol. 2 6–8
Scraper
developing unit, tools, in illustrated parts
list: Vol. 2 B–83
fuser cover glass, tools, in illustrated parts
list: Vol. 2 B–83
Scuff assembly, nip scuff assembly, in
illustrated parts list: Vol. 2 B–51
Scuff Lever Open (Error 07), knob C: Vol. 2
7–21, 7–32
SELFOC lens, cleaning: Vol. 2 6–57
Sensor
drum support assembly, in illustrated parts
list: Vol. 2 B–33
photo interrupter (PHINT)
in illustrated parts list: Vol. 2 B–51
transfer assembly, in illustrated parts
list: Vol. 2 B–23
Sensor A PCBA
PNE (paper near–end) sensor assembly, in
illustrated parts list: Vol. 2 B–67
waste toner assembly, in illustrated parts
list: Vol. 2 B–15
Sensor assembly
drum surface potential, in illustrated parts
list: Vol. 2 B–27, B–37
PNE (paper near–end), in illustrated parts
list: Vol. 2 B–27, B–67
Sensor B PCBA
PNE (paper near–end) sensor assembly, in
illustrated parts list: Vol. 2 B–67
waste toner assembly, in illustrated parts
list: Vol. 2 B–15
Sensor EPS4, disassembly and cleaning
procedures: Vol. 2 7–67
Sensors and switches
cleaning unit set sensor, replacing: Vol. 1
4–143
drum cleaner set sensor, replacing. See
Cleaning unit set sensor
drum surface potential sensor (DSPS),
replacing: Vol. 1 4–139
paper exit sensor 1 (EPS1), replacing: Vol.
1 4–145
paper output sensor 1, replacing. See
Paper exit sensor 1 (EPS1)
replacing: Vol. 1 4–139
surface potential measurement board,
replacing: Vol. 1 4–139
surface potential sensor (DSPS), drum,
replacing: Vol. 1 4–139
Separation section, troubleshooting: Vol. 2
7–63
Sequence of operation: Vol. 1 2–34
Serial 232/422 cable, in illustrated parts list:
Vol. 2 B–79
Service levels
messages, clearing: Vol. 2 6–5
page counts: Vol. 2 6–4
Tech Service option: Vol. 2 6–4
User Maint option: Vol. 2 6–4
Index–23
Advertisement
Table of Contents
