Table of Contents
Advertisement
fuser unit: Vol. 1 4–55
fuser unit air filter: Vol. 1 4–65
fuser unit cooling fan (FCF): Vol. 1 4–125
fuser unit cover glass: Vol. 1 4–58
fuser unit temperature fuse (LTF): Vol. 1
4–63
high–voltage power supply: Vol. 1 4–138
lamp housing filter: Vol. 1 4–65
LED array. See LED print head
LED print head: Vol. 1 4–132
main charger: Vol. 1 4–49
main charger (MCH) varistor: Vol. 1 4–128
miscellaneous parts: Vol. 1 4–127
motors: Vol. 1 4–111
MPU board: Vol. 1 4–107
MPU board ROMs: Vol. 1 4–110
other items: Vol. 1 4–147
paper back–feed sensor (PBFS): Vol. 1
4–156
paper exit sensor 1 (EPS1): Vol. 1 4–145
paper near–end sensor (PNES): Vol. 1
4–157
photoemitting board: Vol. 1 4–157
photoreceptor board: Vol. 1 4–158
paper output belt: Vol. 1 4–129
paper output sensor 1. See Paper exit
sensor 1 (EPS1)
photoreceptor drum: Vol. 1 4–34
power supply, DC: Vol. 1 4–87
precharger: Vol. 1 4–49
sensors and switches: Vol. 1 4–139
smoke filter: Vol. 1 4–76
solenoids: Vol. 1 4–126
surface potential measurement board: Vol.
1 4–139
surface potential sensor (DSPS), drum:
Vol. 1 4–139
tension arm: Vol. 1 4–127
terminating resistors: Vol. 1 4–98
toner cartridge: Vol. 1 4–29
top of form (TOF) sensor. See Paper
back–feed sensor (PBFS)
tractor: Vol. 1 4–147
Index–22
tractor motor: Vol. 1 4–120
transfer assembly: Vol. 1 4–66
transfer elevator motor: Vol. 1 4–122
transfer/separator charger: Vol. 1 4–49
transfer/transport unit: Vol. 1 4–66
transport belts: Vol. 1 4–69
vacuum fan (VAF): Vol. 1 4–69
waste toner bottle: Vol. 1 4–10
waste toner bottle full sensor (WTBF): Vol.
1 4–13
waste toner bottle set sensor (WTBS): Vol.
1 4–15
waste toner recovery unit: Vol. 1 4–17
Xenon (flash) lamp: Vol. 1 4–58
Replacing consumables, schedule, user
responsibility: Vol. 2 6–9
Reset stacker: Vol. 2 7–8
Resistors, terminating, controller board,
controller module, replacing: Vol. 1 4–98
Rod, drum auxiliary rod (drum setting rod),
tools, in illustrated parts list: Vol. 2 B–83
Rollers, drum support, replacing: Vol. 1 4–54
ROMs, MPU board, replacing: Vol. 1 4–110
Rotary switch locations, MPU board: Vol. 1
3–54
Rotary switch setting, MPU board: Vol. 1
3–61
RS–232/422 switch: Vol. 1 5–15
Rubber, press paper, in illustrated parts list:
Vol. 2 B–51
S
Safety, precautions: Vol. 1 1–4
Safety regulations: Vol. 2 A–7
Sample printouts: Vol. 2 7–105
"skipped" area on printout: Vol. 2 7–112
"skipped" area on printout near perforation:
Vol. 2 7–120
carrier across entire printout: Vol. 2 7–126
continuous "skipped" area across narrow
width of printout: Vol. 2 7–130
Advertisement
Table of Contents
