Chapter 4
Consumables Replacement
Replacing The Waste Toner Bottle
When the "WASTE TONER FULL" message appears on the control
panel, replace the waste toner bottle by performing the following
steps, and discard the full bottle. Do not reuse the bottle.
To replace the waste toner bottle, perform the following steps:
1. When paper motion stops, wait 15 seconds, then open the
printer front upper cover. (See page 130.)
2. Lower the opening lever, pull the green handle toward you, and
open the waste toner recovery unit.
134
Legend:
1)
Waste Toner Recovery Unit
2)
Green Handle
3)
Opening Lever
1
2
3