Alarm Operation; Push-Button Alarm - ASCOM d81 Messenger User Manual

User Manual
Ascom d81 DECT Handset
7

Alarm Operation

The parameters described in this chapter are set in the PDM/Device Manager. See the
handset's Configuration Manual.
Note: The alarm functionality is applicable for the d81 Protector only. In addition, some
functions are not available when upgrading the product license from d81 Messenger to d81
Protector, or require a functionality license. See the following chapters for more information.
If a shared phone is used, it must be logged in to the system to be able to send alarm. See
4.2 Log in to or out of a Shared Phone
7.1

Push-Button Alarm

The push-button
press. By default, long press is defined for test alarm (see
press is defined for personal alarm (see
7.1.1 Test Alarm
Press and hold the push-button
displayed. Depending on set parameters;
• a beep is heard
• the orange LED flashes twice
• the vibrator stirs
• the handset receives a notification that the alarm has been received by the system. This
is a system dependent feature.
• if configured, the ALS (see
the alarm has been sent, or a call is established to a pre-defined number (see
Automatic Call after Alarm
Note: If the parameter "Silent alarm" is set, no ALS will be triggered and no indication of
an alarm has been sent by the handset/received by the system is shown.
• information about the handset's location is sent along with the alarm, see
with Location Information
7.1.2 Personal Alarm
Press the push-button
displayed. Depending on set parameters;
• a beep is heard
• the orange LED flashes twice
• the vibrator stirs
• the handset receives a notification that the alarm has been received by the system. This
is a system dependent feature.
• if configured, the ALS (see
the alarm has been sent, or a call is established to a pre-defined number (see
Automatic Call after Alarm
Note: If the parameter "Silent alarm" is set, no ALS will be triggered and no indication of
an alarm has been sent by the handset/received by the system is shown.
• information about the handset's location is sent along with an alarm, see
Location Information
08 June 2012 / Ver. D
on page 21.
can be defined to send an alarm by a long press and by multiple
7.1.2 Personal
until a dialog window "Test Alarm" (default) is
7.5 Acoustic Location Signal
on page 45)
on page 44.
twice or more, the dialog window "Personal Alarm" (default) is
7.5 Acoustic Location Signal
on page 45).
on page 44.
7.1.1 Test Alarm), and multiple
Alarm).
on page 44) is activated after
7.4 Alarm
on page 44) is activated after
7.4 Alarm with
TD 92644EN
7.6
7.6
42