ASCOM d81 Messenger User Manual page 56

User Manual
Ascom d81 DECT Handset
8.1.9 Call Services
Note: These functions are system dependent. Besides the default Call services functions, it is
possible to define 10 extra system specific call services - with or without automatic
disconnection. The parameters are set up in the PDM/Device Manager, see the handset's
Configuration Manual.
Absence Handling
The reason for being absent and the return time can be specified here.
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call services".
4 Select "Absence"
5 Select the applicable absence reason in the list. The number of absence reasons (for
example "Lunch", "Meeting", "Trip" etc.) are configured in the PDM.
6 Press "Select.
7 Enter time (HHMM) or date (MMDD) depending on the selected absence reason.
8 Press "OK".
The handset sends an absence reason code to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
Deactivate the Absence Setting
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call services".
4 Select "Absence"
5 Select "Deactivate".
6 Press "Select".
Divert Internal/External Calls
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call services".
4 Select "Divert calls"
5 Select "Internal" or "External".
6 Select "Activate".
7 Enter number (maximum 24 digits) to divert to, or press the soft key
the call contact list.
8 Press "OK"
The handset sends a diversion reason code to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
To stop diversion select "Deactivate" and press the soft key "OK".
13. Only visible if absence reason codes are defined in handset via PDM/Device Manager.
14.Only visible if diversion reason codes are defined in in handset via PDM/Device Manager.
08 June 2012 / Ver. D
in the menu.
13
.
in the menu.
13
.
in the menu.
14
TD 92644EN
to enter
52