ASCOM d81 Messenger User Manual page 69

User Manual
Ascom d81 DECT Handset
Turn the Vibrator on/off
If the vibrator is activated, it will vibrate at incoming call and message.
Tip: It is also possible to activate the handset's vibrator when receiving a message during a
call via PDM/Device Manager. See the handset's Configuration Manual.
Note: When the vibrator is enabled on an intrinsically safe handset, the handset will
alternate between vibration and sound. That is, vibration and sound are not activated
simultaneously.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Vibrator alert".
5 Select "On", "On if silent" (that is, the vibrator is on when the handset is muted), or
"Off"
6 Press "Back".
Set the Key Sound
This means that every time a key is used, the handset gives a small sound.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Key sound".
5 Select "Silent, "Click", or "Tone".
It is possible to listen to the key sound by pressing "Play".
6 Press "Back".
8.7.2 Lock Settings
Activate the Automatic Key lock
Note: It is possible to answer/end a call while the keypad is locked. If the handset is
configured via the PDM/Device Manager, it is also possible to call a pre-defined emergency
number while the keypad is locked. See handset's Configuration Manual.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Locks".
4 Select "Automatic key lock".
5 Select "On" for activation of automatic key lock.
Deactivate the Automatic Key lock
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Locks".
4 Select "Automatic key lock".
5 Select "Off" for deactivation of automatic key lock.
08 June 2012 / Ver. D
in the menu.
in the menu.
in the menu.
in the menu.
TD 92644EN
65