ASCOM d81 Messenger User Manual page 99

User Manual
Ascom d81 DECT Handset
Not allowed
LED Error Indications
See also chapter
LED is flashing red, quick flash, (100 ms on, 800 ms off)
1) If a third handset, that is another handset than the "old" (the replaced handset) and
"new" (the replacement handset) handset, is inserted into the charger during Easy
Replacement, this error indication appears. Change to the correct handset.
2) The charger has found that Easy Replacement does not work. Change back to the "new"
handset.
LED is flashing red, long flash (800 ms on, 100 ms off)
Error during Easy Replacement. Both handsets need to be sent for service.
08 June 2012 / Ver. D
1) The handset with the shared
phone functionality enabled
cannot be logged in due to
another handset using the
extension (that is, User).
Note: If a password (that is, AC
code) is required to login a
handset, it is possible to the login
the other handset. The first logged
in handset will automatically be
logged out.
2) The extension (User) does not
exists.
3) The password is not correct.
LED Indications during Easy Replacement
TD 92644EN
1) Logout the handset that
uses the extension.
2) Make sure that you entered
correct extension. If needed,
contact the system
administrator.
3) Make sure that you have
entered correct password. Ask
the system administrator if you
have forgot the password.
on page 88.
95