Easy Replacement Of Handset - ASCOM d81 Messenger User Manual

User Manual
Ascom d81 DECT Handset
Non-Intrinsically handset
Figure 13. Replaceable battery. Unlock the lid/untighten the screws and remove the

15.2 Easy Replacement of Handset

Easy replacement can be used if a handset needs to be replaced due to, for example, a
broken display. The easy replacement procedure is done via the handset display and the DC4
Advanced Desktop Charger, or the CR3 Charging Rack.
The following settings are replaced during easy replacement:
• DECT registration
• User parameters (including User ID)
• Contacts
• The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
• Call list
• Messages
• Bluetooth pairing list
• License(s)
15.2.1 Before Starting Easy Replacement Procedure
1 Check that both the old handset (that is, the handset to be replaced) and the new
handset (that is, the replacement handset) are of the same device type (d81).
Tip: It is possible to perform Easy Replacement between different product licenses (that is
d81 Messenger and d81 Protector). The new handset's product license is not replaced by
the old handset's product license during the procedure.
2 Make sure that the handset batteries are charged before starting the easy
replacement procedure.
3 Switch off the new handset by long pressing
33. A handset's product license, for example d81 Protector, and/or license dependent functions can be moved to an
unlicensed handset (d81 Messenger) using PDM/Device Manager.
08 June 2012 / Ver. D
Figure 12.
3
1
2
battery according to the illustration.
33
3
1
2
Intrinsically safe handset
.
TD 92644EN
1
86