Alarm Operation; Acoustic Localisation Signal; Push-Button Alarm; Test Alarm - ASCOM I75 User Manual

User Manual
Ascom i75 VoWiFi Handset
6

Alarm Operation

6.1

Acoustic Localisation Signal

A parameter in the handset determines whether or not an Acoustic Localisation Signal
(ALS) should sound after an alarm. The ALS is silenced by pressing the Mute button.
6.2

Push-button Alarm

Press the red alarm button twice within two seconds to activate the alarm. An information
text, by default "Personal Alarm", is displayed. The alarm is sent to the alarm central that
distributes it further. After that the handset returns to stand-by mode. Note that you can
always trigger the alarm when you are speaking, editing your settings, or while the phone
is locked.
Note: The information text can be changed using a parameter in the handset.
6.3

Test Alarm

Press and hold the red alarm button until the information text is displayed, default Test
Alarm.
6.4

No-movement Alarm

Note: The No-movement alarm requires that the licence option is made available in the
handset. For information on how to add a licence, see
54.
You can activate/deactivate the alarm function in the menu, see
No-movement alarm
function, see
alarm, i.e. if it is deactivated it will be activated and vice verse. Press the Soft key, or press
and hold the Hot key, to put the alarm in or out of operation, respectively.
The No-movement alarm on icon on your display is an indication that the No-movement
alarm is in operation.
Send No-movement alarm
The No-movement alarm will go off when you have not moved within a preset period of
time (default 30 seconds). Before the alarm is activated a warning signal sounds and the
No-movement on icon starts to flash. If you do not cancel the alarm by pressing a key, the
alarm is sent and No-movement alarm is shown in the display.
Activate No-movement alarm after sending
When a No-movement alarm has been sent, it is made active again by pressing a key or by
moving the handset.
2006-09-22/ Ver. B
on page 38, or by programming a Soft/Hot key as a short-cut to the
9.5.8 Edit a Soft key on page 39. The Soft/Hot key changes the state of the
TD 92319GB
A.2 Add an Alarm Licence
9.5.6 Deactivate/Activate
on page
23