System Profiles - ASCOM d81 Messenger User Manual

User Manual
Ascom d81 DECT Handset
10

System Profiles

A system profile can be used when certain settings in a handset are required and preventing
that a user changes these settings. The system profile contains settings such as alarm
settings, soft key settings, and presence settings, and can only be configured in PDM or
Device Manager, see Configuration Manual, Ascom d81 DECT Handset, TD 92674EN.
When the system profile is activated
It is possible to indicate when a system profile is activated in the handset by showing its
profile name in idle mode.
The system profile can be used in combination with the user profile (see
56). If there is a conflict between the settings in the system profile and the settings in the
user profile, the settings in the system profile will be used.
If a user changes a setting in the handset menu that is determined by a system profile, the
menu will be updated but the setting will not be changed.
Example:
A system profile System Profile A1 has been activated and is indicated by its name is
displayed in idle screen. In this case, the pull-cord alarm and no-movement alarm are
activated and is indicated by the corresponding icons in the left lower corner in the idle
screen.
A user wants to deactivate the alarms and selects Settings >Alarm>Activate alarm. The
check boxes do not indicate that the alarms are activated. The user can mark or unmark the
checkboxes without that the alarm settings will be changed due to the settings in the
system profile supersedes the settings made by the user.
Tip: If this system profile always shall be activated, it is recommended to hide the Alarm
menu in the handset using PDM/Device Manager.
01/01/2010
System Profile A1
Menu
Figure 10. Example showing an activated system profile.
28.The system profile can only be activated using PDM/Device Manager or remote via an Unite application.
08 June 2012 / Ver. D
28
Figure 9.
12:34 12:34
Activate alarm
Pull-cord
Man-down
No-movement
1122
Select
, its settings is not displayed in the handset's menu.
Back
TD 92644EN
8.3 Profiles on page
77