Alarm Operation; Send Personal Alarm; Send Test Alarm; Man-Down And No-Movement Alarm - ASCOM i62 Quick Reference Manual

Alarm Operation

Note:
Protector license only.

Send Personal Alarm

Press twice within 2 seconds until "Personal alarm" is
displayed.

Send Test Alarm

Press and hold until "Test alarm" is displayed.
1

Man-down and No-movement Alarm

The Man-down alarm will react if the handset is tilted (default
45°) from the vertical for a predefined period of time (default
7 seconds). The No-movement alarm will react if no movement
is detected during a predefined period of time (default
30 seconds).
The handset alerts by beep, vibrator and LED signals, depending
on the settings, during a predefined period of time (default
7 seconds). At the same time the handset displays the message
"Man-down warning. Cancel?" or "No-movement warning.
Cancel?".
The handset then sends the alarm, unless the alarm is cancelled.
The handset will confirm that the alarm has been sent by beep,
vibrator and LED signals. In addition the handset displays the
message "Man-down warning sent" or "No-movement warning
sent".
The handset location is sent along with the alarm.
If configured in the Device Manager, an Acoustic Location Signal
(ALS) is activated after the alarm has been sent.
The handset may be programmed to automatically call a
predefined telephone number after the alarm has been sent.
The Man-down and No-movement alarm functions are inactive
under the following conditions:
• While the handset is placed in a charger.
• During calls (depending on settings), to avoid false alarms if
the user tilts the handset or is motionless during a call.
1. The handset version must be WH1-AAAA/2A or above (see label under
battery cover). These functions require a license.
11