Calling; Incoming Call; Outgoing Call - ASCOM d81 Messenger User Manual

User Manual
Ascom d81 DECT Handset
6

Calling

6.1

Incoming Call

The flashing LED, accompanied by a ring signal and/or a vibrating handset, gives a notice of
a call. Ring signal and vibrator can be disabled, see
64.
The calling party's handset number or name is shown. The name will be shown if the calling
party's handset number is stored in the local phonebook.
6.1.1 Answer a Call
When the signal sounds, press
loudspeaking mode
information is available.
TIP: When a headset is connected to the handset, the headset button can be used to answer
the call.In addition, it is possible to configure the headset button with a specific function,
such as post-dial, dial last called number, or dial a predefined number. See the handset's
Configuration Manual.
Other answering methods can also be set in the Settings menu, see
The answering methods are; Automatically and Loudspeaking.
When Automatically is enabled, all incoming calls will be connected automatically.
6.1.2 End a Call
A press on
the call can also be retrieved from the Calls menu > Call time.
TIP: If configured, it is also possible to end a call by putting the handset in a charger. See the
handset's Configuration Manual for more information.
NOTE: Some systems/PBXs require that the handset sends a DTMF in order to end a call. See
the handset's Configuration Manual for more information.
6.2

Outgoing Call

6.2.1 Pre-Dial
Enter the number and press
dialling. If needed, press "Clear" to erase the number. By using the navigation key it is
possible to step and add/delete a digit in a number.
It is possible to turn on the tone sender in a pre-dialed number by long pressing
6.2.2 Post-Dial with Headset Button
If a headset is used, it is possible to press its button
number to be dialed.
1.When Bluetooth is enabled, the loudspeaker audio is lowered due to current limitations in the intrinsically safe handset.
08 June 2012 / Ver. D
to answer the call, or press
1
. The name/number of the calling party is displayed if calling line
ends the call. The duration of the call is shown in the display. The total time of
to get the line. The number is shown on the display while
8.7.1 Sound and Alert Settings
to answer the call in
8.7 Settings
2
to get a ring tone and then enter the
TD 92644EN
on page
on page 64.
.
35