ASCOM d81 Messenger User Manual page 42

User Manual
Ascom d81 DECT Handset
The icon
call cannot hear you. To turn the microphone back on, do as follows:
1 Press "More" during the call
2 Select "Microphone on".
3 Press "Select".
It also possible to turn the microphone off/on by a long press on
When long pressing
microphone is turned off/on. When pressing
6.3.4 Audio Transfer
To transfer audio between the Bluetooth headset and the handset's earpiece, do as follows:
1 Press "More" during the call.
2 Select "Audio transfer"
3 Press "Select".
6.3.5 Start a New Call during Conversation
1 Press "More" during the call.
2 Select "New Call".
3 Press "Select".
4 Enter the number and press
6.3.6 Call Back
When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone louds, do as follows:
1 Press "More".
2 Select "Call back"
3 Press "Select".
4 Press
5 When the handset alerts, press
6.3.7 End a Call
Prerequisite, a new call has been started during conversation, see
during Conversation
1 Press "More" during the call.
2 Select "End Call".
3 Press "Select". This will end the current call and the previous call is resumed.
Note: It is also possible to end a call by putting the handset in a charger. Note that all
ongoing calls will be disconnected. See Configuration Manual, Ascom d81 DECT Handset, TD
92674EN.
4.Visible if Bluetooth connection is active.
08 June 2012 / Ver. D
indicates a silenced microphone. This means that the other part in an ongoing
or pressing
4
.
and wait until the handset alerts.
on page 38.
, a short peep is also heard indicating that the
in a PTT group call, no beep is heard.
, or "Call".
and the call will automatically be started.
TD 92644EN
or .
6.3.5 Start a New Call
38