Memory Programming - Icom IC-R6 Instruction Manual

QUICK REFERENCE GUIDE
Your first scanning experience (continued)
5. Receive mode selection
Push [MODE] repeatedly to
select a desired receive mode.
• The FM, WFM or AM is selectable.
IV

Memory programming

The IC-R6 has a total of 1300 memory channels for stor-
ing often used receive frequency, mode, etc. The memory
channels include 200 auto write channels and 50 scan edge
channels.
1. Setting frequency
In the VFO mode, set a desired receive frequency mode.
• When the " " icon is displayed, push [V/M] to select the VFO
mode.
2. Selecting a memory channel
H o l d d o w n [ S . M W ] ( V / M ) fo r
1 second, then rotate [DIAL] to
select a desired memory channel.
• The " " icon and memory chan-
nel number blink.
3. Writing a memory channel
Hold down [S.MW](V/M) for 1 second until 3 beeps sound.
• The memory channel number automatically increases when hold-
ing down [S.MW](V/M,) after programming.
[DIAL]