Partial Reset; All Reset - Icom IC-R6 Instruction Manual

10
OTHER FUNCTIONS

Partial reset

If you want to initialize the operating settings (VFO frequen-
cy, VFO settings, Set mode contents) without clearing the
memory contents, a partial resetting function is available for
the receiver.
While holding down [FUNC] and [TS], turn the power ON
to partially reset the receiver.
While holding down [FUNC] and [TS], turn the power
OFF, then ON again to partially reset the receiver.
59

All reset

The function display may occasionally display erroneous
information (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See to the left for details.
IMPORTANT!:
Resetting the receiver CLEARS all memory informa-
tion and initializes all values in the receiver, including TV
channel skip setting.
While holding down [FUNC] and [Z], turn the power ON
to reset the CPU.
*The appearing frqeuency
is differ according to
receiver version.