Icom IC-R6 Instruction Manual page 12

QUICK REFERENCE GUIDE
D Starting scan
1. Select the VFO mode.
Push [V/M] to select the VFO mode for a VFO scan opera-
tion, such as full scan, band scan and programmed scan.
• Select the memory mode by pushing [V/M] again for a memory
scan operation, such as all memory scan, bank link scan or bank
scan.
2. Selecting a scan type
H o l d d o w n [ S C A N ] ( M O D E ) fo r
1 second, and then rotate [DIAL]
to select one of a desired scanning
types.
• Select "ALL" for full scan, "BAND" for
band scan, "P-LINK x" for programmed
link scan (x= 0 to 9), "PROGxx" for
programmed scan (xx= 0 to 24; only
programmed scan edge numbers are
displayed).
• Select "M-ALL" for all memory scan,
"B-ALL" for all bank scan, "B-LINK" for
bank link scan or "BANK-x" for bank
scan (x= A to R, T, U, W, Y; only pro-
grammed bank groups are displayed).
VI
Scan type display examples
In the VFO mode In the memory mode
• Full scan • All memory scan
• Band scan • All bank scan
• Program link scan • Bank link scan
• Program scan • Bank scan