Erasing/Transferring Bank Contents - Icom IC-R6 Instruction Manual

5
MEMORY CHANNELS

Erasing/transferring bank contents

The contents of programmed memory channels can be
erased or transferred to another memory.
INFORMATION: Even if the memory bank contents are
erased, the memory channel contents still remain pro-
grammed.
q Select a desired bank contents to be transferred or erased
from the bank.
Push [V/M] to select the memory mode.
While holding down [BAND], rotate [DIAL] to select a
desired memory bank group.
Rotate [DIAL] to select the bank channel.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
Otherwise the bank contents will be copied to the VFO.
Push and hold
• The original memory channel number is automatically dis-
played, then the "
blink.
27
for 1 sec.
" icon and the memory channel number
e While holding down [MODE], rotate [DIAL] to select the
"BANK" item.
• Pushing [MODE] repeatedly also selects the "BANK" item.
r While holding down [BAND], rotate [DIAL] to select a
desired bank group to transfer.
• Select the "-- -- -- --" display when erasing the contents from the
bank.
[DIAL]
t Rotate [DIAL] to select a desired bank channel.
y While holding down [MODE], rotate [DIAL] to select the
"S.MW" item.
• Pushing [MODE] repeatedly also selects the "S.MW" item.
u Hold down [S.MW](V/M) for 1 second to erase or transfer
the bank contents.
To transfer the bank contents
in bank E.
To erase