16 Ce - Icom IC-R6 Instruction Manual

Memory channel programming
q
Set the desired frequency and
other functions in the VFO mode.
w
Push and hold [S.MW](V/M) for
1 sec. to enter the select
memory write mode.
• 1 short and 1 long beeps sound.
e
Rotate [DIAL] to select a desired
memory channel.
r
Push and hold [S.MW](V/M) for
1 sec. to program the contents
into the selected channel.
• 3 beeps sound.
Scan skip setting
q
Push [V/M] to
memory mode.
w
Rotate [DIAL] to select a desired
memory channel.
e
Hold down [FUNC], push [
(V/M) to set the skip setting
(skip channel
frequency) ON or OFF.
VFO scans
q
Push [V/M] to select the VFO
mode.
w
Push and hold [SCAN] (MODE)
for 1 sec.
• A scan type appears.
e
Rotate [DIAL] to select the
desired scan type.
r
Push [SCAN] (MODE) to start
select the
the scan.
• Rotate [DIAL] to change the scanning
direction.
• During scan, push [V/M] to start the
]
auto memory write scan.
t
Push [SCAN](MODE) again to
or skip
stop the scan.
Memory scans
q
Push [V/M] to
memory mode.
w
Push and hold [SCAN](MODE)
for 1 sec.
• A scan type appears.
e
Rotate [DIAL] to select the
desired scan type.
r
Push [SCAN] (MODE) to start
the scan.
• Rotate [DIAL] to change the scanning
direction.
t
Push [SCAN](MODE) again to
stop scan.
select the