Set Mode; General - Icom IC-R6 Instruction Manual

9

SET MODE

General

Set mode is used for programming infrequently changed val-
ues or options of the functions.
In addition, the IC-R6 has the Expand set mode which is
used for programming even more infrequently changed val-
ues or options of the functions. When turning the Expand set
mode OFF, only half of the Set mode items are displayed for
simple operation.
D Set mode entering and operation
q Hold down [SET](TS) for 1 second to enter the Set mode.
w Rotate [DIAL] to select a desired item.
e While holding down [FUNC], rotate [DIAL] to select a
desired value or option.
r Push [SET](TS) to exit the Set mode, or repeat w and e
to set other items.
43
D Expand set mode ON/OFF
q Hold down [SET](TS) for 1 second to enter the Set mode.
w Rotate [DIAL] to select the "EXPAND" item.
e While holding down [FUNC], rotate [DIAL] to turn the
r Rotate [DIAL] to select a desired item.
t While holding down [FUNC], rotate [DIAL] to select a
[DIAL]
y Push [SET](TS) to exit the Set mode, or repeat r and t
Expand set mode ON or OFF.
Expand set mode OFF Expand set mode ON
desired value or option.
to set other items.