Selecting Display Type - Icom IC-R6 Instruction Manual

5
MEMORY CHANNELS

Selecting display type

During memory mode operation, either the programmed
bank name, memory name or the channel number can be
displayed instead of the frequency display.
When the selected memor y
channel has no programmed the
bank name or memory name,
the frequency is displayed.
q Push [V/M] to select the memory mode.
• If desired, push [BAND] repeatedly to select a desired bank
group.
w While holding down [FUNC], push [BAND] repeatedly to
select the display type from frequency, bank name, mem-
ory name or the channel number.
23
[DIAL]
Frequency display
Bank name display
Memory name display
Channel number display
D Selecting bank channel display
During bank channel operation, the bank channel number
can also be displayed, instead of the memory channel
number.
q Select the channel number display as described to the
left.
w While holding down [BAND], rotate [DIAL] to select a
desired bank.
• The bank can also be selected by pushing [BAND] repeatedly.
Memory channel
number display
Push
Auto write channel
number display
Bank channel
number display
Bank channel
number display