Auto Power-Off Function - Icom IC-R6 Instruction Manual

D Cloning using a personal computer
Data can be cloned to and from a personal computer
® ®
(Microsoft Windows 2000/XP/Windows Vista
using the optional CS-R6
CLONING SOFTWARE
al OPC-478/OPC-478UC
CLONING CABLE
HELP file for details.
CLONING SOFTWARE
D Cloning error
NOTE: DO NOT push any key on the sub-receiver during
cloning. This will cause a cloning error.
When the display appears as below, a cloning error has
occurred.
In such a case, both receivers automatically return to the
clone standby condition and cloning must be repeated.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the U.S.A. and other countries.
The IC-R6 can be set to automatically turn OFF after a
specified period in which no operation is performed.
®
or Windows 7)
and the option- 120, 90, 60, 30 minutes and OFF can be specified. The
specified period is retained even when the receiver is turned
. Consult the CS-R6
OFF by the auto power-off function. To cancel the function,
select "OFF" in step e below.
q Push [SET](TS) for 1 second to enter the Set mode.
w Rotate [DIAL] to select the "AP OFF" item.
e While holding down [FUNC], rotate [DIAL] to select a
r Push [SET](TS) to exit the Set mode.
OTHER FUNCTIONS

Auto power-off function

• Turn the Expand set mode ON for selection. (p. 39)
[DIAL]
desired time or to turn the function OFF.
10
10
58