Icom IC-R6 Instruction Manual page 58

9
SET MODE
D Dial select step
Select the tuning step between 100 kHz, 1 MHz (default)
and 10 MHz for a temporary faster frequency setting. When
setting a frequency with the increased tuning step, hold
down [FUNC], and then rotate [DIAL].
D Priority watch
Turn the priority watch or priority beep (priority watch with
beep sounds) ON.
• OFF : Turns the function OFF.
• ON : Starts priority watch after exiting the Set mode.
• BELL : When a signal is received on the priority fre-
quency, beeps sound and the ((*)) icon blinks.
45
D Key-touch beep
The key-touch beep can be turned OFF for silent operation.
D Beep output level
Adjust the key-touch beep tone level to one of 32 set levels,
or set it to follow the volume control level.
• VOLUME
• _ _ _ _ _ _ – ooo ooo
(default: OFF)
The key-touch beep (previous item) must be set to ON to
have a beep tone.
: The beep tone level is linked to the vol-
ume set level. (default)
: The beep tone level is independently
adjustable at one of 32 levels.
(default: ON)