Skip Channel/Frequency Setting - Icom IC-R6 Instruction Manual

Skip channel/frequency setting

Memory channels can be set to be skipped for a memory
skip scan. In addition, memory channels can be set to be
skipped for both a memory skip scan and a frequency skip
scan. These are useful to speed up the scan time.
q Select a memory channel:
Push [V/M] to select the memory mode.
Rotate [DIAL] to select a desired channel to be a skip
channel/frequency.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
e Push [MODE] repeatedly to select the "SKIP" item.
• While holding down [MODE], rotating [DIAL] can also select
the "SKIP" item.
[DIAL]
• Skip setting
r While holding down [FUNC], rotate [DIAL] to select the
skip option from "SKIP," "PSKIP" or "OFF," for the selected
channel.
• SKIP : The channel is skipped during a memory or bank scan.
• PSKIP : The channel is skipped during a memory/bank scan.
The programmed frequency is skipped during a VFO
scan, such as a programmed scan.
• OFF : The channel or programmed frequency is scanned dur-
ing any scan.
t Push [MODE] repeatedly, or while holding down [MODE],
rotate [DIAL] to select the "S.MW" item.
y Hold down [S.MW](V/M) for 1 second to store the skip status.
• The "SKIP" or "PSKIP" icon appears, according to the skip
selection in step r.
• Skip channel setting
"SKIP" appears
CONVENIENT!
The skip setting can also be set using the following steps, for
easy setting.
q Select a desired memory channel to be set as a skip
channel/frequency.
w While holding down [FUNC], push
skip status from "SKIP," "PSKIP" and "OFF
SCAN OPERATION
• Program skip setting
"PSKIP" appears
[ ](V/M) to select the
."
(no indication)
6
6
34