Selecting A Memory Channel; Lock Function - Icom IC-R6 Instruction Manual

Selecting a memory channel

q Push [V/M] to select the memory mode.
• " " appears when the memory mode is selected.
w Rotate [DIAL] to select a desired memory channel.
• Only programmed memory channels can be selected.
• While holding down [FUNC], rotate [DIAL] to select a memory
channel in 10 channels steps.
[DIAL]
[DIAL] changes the
memory channel.
FREQUENCY AND CHANNEL SETTING

Lock function

To prevent accidental frequency changes and unnecessary
function access, use the lock function.
While holding down [FUNC], push and hold
for 1 second to turn the lock function ON or OFF.
• " " appears while the lock function is activated.
• [SQL] and [ ]/[ ] can be used while the lock function is in use
with default setting. Either or both [SQL] and [ ]/[ ] keys can
also be locked in the Set mode. (p. 43)
3
[ ](BAND)
" " appears while the
lock function is in use.
3
12