Table of Contents
Advertisement
2-7-3 Making Settings in the Video Settings Pages
The following tables show the items
that can be set in the video settings
pages.
Video settings page 1/2
Item
Setting
VIN TRIG
Select whether or not to output a GPI signal from pin 5 of the AUX
connector at the IN points of a video auto-edit (excluding audio split editing).
OFF: Do not output a GPI signal.
ON: Output a GPI signal.
CONFI
Select whether or not to carry out CONFI playback during crash recording.
OFF: No CONFI playback
ON: CONFI playback
Note
In insert or assemble editing, CONFI playback is not possible.
PREREAD
Select whether or not to carry out preread editing.
OFF: No preread editing
ON: preread editing
VIDEO IN
Set the input level of composite video input signals.
PRESET: Fixed at factory default level.
VAR: Adjustable as desired.
To adjust
The current input level is displayed when you select VAR. Select the valus
displayed above VAR, and press the UP or DOWN button to change the
displayed value. Adjust so that the input video level display bar is close to
the center.
ZEBRA
Set the zebra pattern to be displayed in the LCD monitor.
OFF: Do not display.
50%: Display zebra pattern with 50% or more video level.
80%: Display zebra pattern with 80% or more video level.
100%: Display zebra pattern with 100% or more video level.
OUT REF
Select the signal to which the internal reference video signal generator is
(See page
synchronized.
2-11 for
REF: Synchronize with the signal input to the REF. INPUT connector.
details.)
INPUT: Synchronize with the signal selected in the home page (composite
video signal or SDI signal).
VIDEO
CONFI
PREREAD
VIDEO
80
ZEBRA
PRESET
OFF
VIN TRIG
OUT REF
INPUT
Preparations
2-29
Advertisement
Table of Contents
