Table of Contents
Advertisement
3
Attach the two slide plates (for
securing the handle) with two
screws for each plate.
4
Attach the handle supplied with
the BKNW-225, sliding the
bottom flanges into the slots on
the slide plates, making sure the
coin screws on the handle align
with the holes on the units.
Handle supplied
with BKNW-225
5
Tighten the coin screws.
To separate the DNW-A25WS/
A25WSP
Place both units in horizontal position
and remove the handle. Then, loosen
the coin screw at the center of each
coupling plate until the left and right
members of the plate can be separated.
Slide
plates
Coupling plate
Appendixes
A-17
Advertisement
Table of Contents
