Table of Contents
Advertisement
Menu items in the 300s, relating to editing operations (continued)
Item number
Item name
306
DMC INITIAL SPEED In DMC editing, select the initial tape speed which
307
AUTO-DELETION
FOR
INCONSISTENT
DATA
308
SELECTION OF STD/
NON-STD FOR
COMPOSITE VIDEO
IN
Settings
is set automatically.
MANU : the speed determined by rotation angle of
the shuttle dial
PLAY: normal playback speed
STILL: still playback speed
±0.03 to ±1: the speed selected in this range
(±0.03, ±0.1, ± 0.2, ±0.5, and ±1 times normal
speed can be selected.)
Select what happens when an erroneous edit point
is set.
MANU : A warning is given by flashing the DELETE
button on the control panel.
The operator must manually delete the unnecessary
edit point .
NEG&E: When inconsistent edit points are set, such
as when an OUT point is before an IN (or audio IN)
point, or when too many edit points are specified,
the previously set edit point is deleted.
NEG: When inconsistent edit points are set, such as
when an OUT point is before an IN (or audio IN)
point, the previously set edit point is deleted. When
too many edit points are specified, the DELETE
button on the control panel flashes to give a
warning.
Note
Pressing the button corresponding to an edit point
to be deleted and the DELETE button
simultaneously deletes the edit point. If an
erroneous edit point is set (the DELETE button is
flashing), editing is not executed.
Select the STD or NON-STD mode in accordance
with a composite video input.
AUTO : Detect automatically whether the input
video luminance and chrominance signals are
interleaved or not. If they are interleaved, select the
STD mode. If they are not interleaved, select the
NON-STD mode.
STD: The STD mode is always used (forced STD
mode).
N-STD: Use this setting when color framing of the
input video signal is unstable (forced NON-STD
mode).
6-15
Setup Menu
Advertisement
Table of Contents
