Table of Contents
Advertisement
6-3 Extended Menu
Menu items in the 600s, relating to the time code generator (continued)
Item number
Item name
603
ID CODE PRESET
604
ID CODE SW
605
TCG REGEN MODE
6-22
Setup Menu
Settings
Select whether or not to set the ID code.
OFF : Do not set the ID code.
ON: Set the ID code.
To set the ID code:
1 Set this item to ON.
The menu item display area in the submenu
screen flashes.
2 Select jog mode and turn the jog dial to select
the column, then hold down the search button
while turning the jog dial to change the digit
value.
3 When the ID code setting is complete, press the
SET button.
This saves the ID code setting, and the setting of
this item returns to "OFF".
Select whether or not to record the ID code set
using item 603 in the user bits.
OFF : Record the normal data in the user bits.
ON: Record the ID code in the user bits.
Select the signal to be regenerated when the time
code generator is in the regeneration mode (i.e.,
when the PRESET/REGEN switch in the timecode
section is set to REGEN, or the unit is in automatic
edit mode).
TC&UB : Both the timecode and user bits are
regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits ane regenerated.
Advertisement
Table of Contents
