Table of Contents
Advertisement
2-1 Power Preparations
To attach the battery pack
Attach the BP-L60A/L90A as shown
in the figure below. Before attaching,
remove the cover of the battery
connector.
Remove the cover in the same way that
you remove the battery pack. For
details see the next section "To
remove the battery pack".
1 Align the groove on the top
panel of the BP-L60A/L90A
with the guides.
2 Slide the BP-L60A/L90A in so
that its connector is firmly
connected to the unit's battery
connector.
2-2
Preparations
To remove the battery pack
With the lever pushed in, slide the BP-
L60A/L90A out.
Lever
2-1-3 Using the BP-90A
Battery Pack
Different battery adaptors are used
when mounting the BP-90A on the top
panel of this unit and when connecting
it the DC IN connector.
This unit can be operated for about 60
minutes at normal temperature on a
fully charged BP-90A Battery Pack.
To charge the battery pack
Before use, be sure to charge the
battery pack with the BC-210/210CE/
410/410CE Battery Charger. It takes
about 2 hours to charge the BP-90A.
For more information about how to
charge the battery pack, refer to the
manual for the BC-210/210CE/410/
410CE.
BP-L60A/L90A
Advertisement
Table of Contents
