Table of Contents
Advertisement
3 SET UP/BLACK LEVEL knob
Adjusts the setup level (in 525/60
mode) and the black level (in 625/50
mode). This knob is a push switch.
When you press it to bring it into the
raised position, the setting becomes
VARIABLE. When you press it again
to depress it, the setting returns to
PRESET.
PRESET: This is the normal setting.
Regardless of the knob position,
the setup level is set to the
standard value.
VARIABLE: The setup level can be
adjusted across a range of ±30
IRE (in 525/60 mode) and the
black level can be adjusted across
a range of ±210 mV (in 625/50
mode).
4 CHROMA PHASE knob
Adjusts the chroma phase (phase
relative to burst). This knob is a push
switch. When you press it to bring it
into the raised position, the setting
becomes VARIABLE. When you
press it again to depress it, the setting
returns to PRESET.
PRESET: This is the normal setting.
Regardless of the knob position,
the chroma phase is set to the
standard value.
VARIABLE: The chroma phase can
be adjusted across a range of
±30°.
5 POWER indicator
Lights when the POWER switch 8 is
turned on.
6 LEVEL (speaker/headphones
level) knob
Adjusts the volume of the speaker or
headphones connected to the
HEADPHONES jack 7.
This knob can also adjust the level of
the audio signal output from the
MONITOR OUT connectors when
MONITOR in the submenu is set to
VAR. For details, see page 2-26.
7 HEADPHONES jack
Connect headphones. The speaker is
muted when headphones are
connected.
8 POWER switch
Powers the unit on and off. When the
unit is powered, the POWER indicator
5 lights.
1-19
Overview
Advertisement
Table of Contents
