Table of Contents
Advertisement
6-3 Extended Menu
Item number
Item name
FUNCTION MODE
401
AFTER CUE-UP
402
TIME REFERENCE
FOR PREROLL
403
AUTOMATIC
PREROLL
REFERENCE ENTRY
Menu items in the 500s, relating to tape protection
Item number
Item name
STILL TIMER
501
502
TAPE PROTECTION
MODE FROM
SEARCH
6-20
Setup Menu
Menu items in the 400s, relating to preroll
Settings
Select the state that the unit goes into after a cuing-
up operation.
STOP : Stops (the "STOP mode").
STILL: Still playback (in search mode).
Note
When controlling this unit from an editor with the
standard constants set, select "STOP".
When prerolling a tape section at which timecode
signals are discontinuous, select which to use, the
timecode or CTL signals recorded preceding the
section, for timecode advance and preroll.
CTL : Using CTL signals.
TC: Using timecode signals.
Select whether or not the edit IN point is
automatically set by pressing the PREROLL button
when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
Settings
Select the time delay from the tape transport
stopping (either the "STOP" mode" or the still
playback mode in search mode) until the unit
automatically switches to the tape protection mode,
in order to protect the rotary heads and the tape.
0.5S... 8M ...30M: Set the value in the range 0.5
seconds to 30 minutes.
Select the operation of the protection mode to
protect the rotary heads and tape when in the still
playback mode in search (jog/shuttle/variable)
mode.
STEP : Step forward at
seconds.
STDBY: Switch to "Standby OFF mode" (the unit
not on standby).
1
/
normal speed every 2
30
Advertisement
Table of Contents
