Table of Contents
Advertisement
1-3 Locations and Functions of Parts
Digital signal/timecode/remote control/power input and output
section
Cable clamps
1 REMOTE (9-pin remote control)
connector (D-SUB 9-pin)
When editing with two DNW-
A25WS/A25WSP units, connect this
connector on each unit using a 9-pin
remote control cable (not supplied).
When editing with this unit and D-1,
D-2, Betacam VTR, Digital Betacam
VTR or other external equipment,
connect the external equipment.
1-22
Overview
4 TC OUT connector
3 DC IN connector
2 TC IN connector
1 REMOTE connector
8 SDI IN connector
7 SDI OUT connectors
6 DC OUT connector
2 TC IN (timecode input)
connector (BNC type)
To record timecode from an external
device, input the timecode from the
external device's timecode output
connector.
5 AUX connector
Advertisement
Table of Contents
