Table of Contents
Advertisement
1-3 Locations and Functions of Parts
Tape transport section
qh REC INHI switch
qg REW button
qf EJECT button
qd PLAYER/DMC and RECORDER
buttons/indicators
qs SERVO indicator
qa Jog and shuttle dials
qj Cassette compartment
1 PREROLL button
Press to run the tape up to the preroll
point (located in advance of the IN
point by the amount of the preroll
time). You can set the preroll time
using setup menu item 001. You can
set the state of the unit at the end of
preroll by using setup menu item 401.
By pressing this button at the same
time as the IN/OUT or AUDIO IN
buttons in the editing section, you can
search for a timecode set in advance
and stop at that position. (The tape is
cued up to the preset timecode
position.)
1-8
Overview
5 SP TAPE switch
4 EDIT button
3 REC/SEQ button
2 REC INHI indicator
1 PREROLL button
0 PLAY button
9 F FWD button
8 STANDBY indicator
7 Search button and indicators
6 STOP button
2 REC INHI (recording inhibit)
indicator
Lights under the following situations.
• Set the REC INHI switch qh to ON.
• Press in the erasure prevention plug.
• Insert the Betacam SP cassette and
set the SP TAPE switch 5 to SP PB
ONLY.
• Insert the Betacam cassette (oxide
tape).
Advertisement
Table of Contents
