Table of Contents
Advertisement
1-3 Locations and Functions of Parts
qh REC INHI switch
When on, recording to the tape is
inhibited, regardless of the state of the
cassette's erasure prevention plug.
(The REC INHI indicator 2 lights.)
Timecode and setup menu sections
1 REMOTE/LOCAL switch
Selects the source for control of this
unit. When two DNW-A25WS/
A25WSP units are connected, set this
switch on the player unit to REMOTE.
REMOTE: This unit is controlled
from the device connected to the
REMOTE connector. In this case,
all VTR operations using this
unit's control panel are disabled
except the STOP and EJECT
buttons.
1-12
Overview
qj Cassette compartment
Insert a cassette here. Press the EJECT
button qf to open the compartment.
1 REMOTE/LOCAL switch
2 INT/EXT switch
3 PRESET/REGEN switch
4 F-RUN/R-RUN switch
5 Monitor output switch
6 MENU button
7 SET button
LOCAL: This unit is controlled
When the REMOTE is selected, you
can determine which tape transport
control buttons on the control panel
are enabled. See setup menu item 006
on page 6-3.
from the control panel. Normally
set the switch to this position.
Advertisement
Table of Contents
