Table of Contents
Advertisement
3-7 Special Editing
2
Press the AUTO EDIT button.
The edit starts.
3
While monitoring the picture,
when you reach the point you
want to set as the OUT point,
press the player side or recorder
side OUT button together with the
ENTRY/SHIFT button.
The point where the edit started is
set as the IN point, and the point
where the pressed the OUT and
ENTRY/SHIFT buttons is set as
the OUT point.
3-7-2 Continuous
Editing
When you execute multiple edits in
succession, you can edit from the
second time on by setting the IN and
OUT points of the player side only.
After execution of an edit, the recorder
returns automatically to the OUT
point. Therefore, the recorder side
OUT point of the current edit becomes
the IN point of the next edit.
OUT point of previous edit =
Section edited in
IN point of next edit
previous edit
Recorder unit
Section edited in next edit
Player unit
IN point
Use the following procedure.
3-20
Editing
AUDIO IN
DELETE
1
Set the player side IN point.
2
Press the recorder side PREVIEW
button to conduct a preview.
3
Press the AUTO EDIT button.
The edit starts.
When the edit ends, the recorder
unit stops at the OUT point and
player unit stops 2 seconds after
the OUT point.
To stop an edit
Press the ENTRY/SHIFT button
together with the OUT button.
The edit ends, and the point where you
pressed the buttons becomes the OUT
point.
OUT point
To abort an edit
Press the STOP button on the recorder
unit.
1
AUDIO IN
–
+
–
TRIM
GOOD
LIST
MARK
LIST
SHOT
ENTRY SHIFT
DELETE
ENTRY SHIFT
IN
OUT
IN
PREVIEW
2
3
1 1
+
TRIM
GOOD
MARK
SHOT
OUT
AUTO EDIT
REVIEW
Advertisement
Table of Contents
