Table of Contents
Advertisement
2
Connect the recorder and player,
units as for editing (see page 2-6).
3
Set setup menu item 014 to a
setting other than OFF (see page
6-5).
4
Press the recorder side
RECORDER button to light the
RECORDER indicator on the
recorder unit.
5
Simultaneously press the recorder
side ENTRY/SHIFT button, REC/
SEQ button, and PLAY button.
The recorder side begins
recording.
The STANDBY indicator of the
player unit goes out. The POWER
indicator turns to orange.
The player unit starts recording
automatically when the remaining
time of the recorder side tape
reaches 2 minutes.
The setting of Setup menu item
014 affects what happens when a
tape ends.
When AUTOMATIC
OVERWRITE is selected
Endless recording on the same
cassette continues, overwriting on
the previous contents.
When MANUAL CASSETTE
REPLACE is selected
When the tape end is reached, the
tape is rewound and the EJECT
button begins to flash.
To continue recording, insert a
new cassette into the recorder
unit. The recorder unit will start
recording automatically when the
remaining time of the player side
tape reaches 2 minutes.
To stop sequential recording
Sequential recording stops in the
following cases.
• When a tape transport button
(PLAY, STOP, F FWD, REW) or a
search button is pressed during
recording.
• If the cassette is not exchanged when
the EJECT button flashes though
setup menu item 014 is set to REPL.
Recording and Playback
4-3
Advertisement
Table of Contents
