Removing The Developing Rotary Motor; Removing The Right Frame; Removing The Shield Plate; Removing The Rotary Drive Assembly - Canon MF8100 Series Service Manual

3.5.5.8 Removing the Right Frame

1) Remove the 5 screws [1], and detach the right frame [2].
[2]

3.5.5.9 Removing the Shield Plate

1) Free the flat cable [1] from the connector.
2) Remove the 6 screws [2], and detach the shielding plate [3].
[2]

3.5.5.10 Removing the Rotary Drive Assembly

1) Disconnect the 4 connectors [1], and remove the 2 screws [2].
[1]
[2]
F-3-635
[1]
[1]
F-3-636
[3]
[1]
[2]
F-3-637
0011-6598
2) Disconnect the connector [1], and remove the 3 screws [2]; then, detach
the rotary drive assembly [3].
0011-6619
Be sure to tighten the self-tapping screw used to secure the rotary drive as-
sembly only at the end of the work.

3.5.5.11 Removing the Developing Rotary Motor

1) Remove the 2 screws [1], and detach the toner cartridge motor [2] from
the rotary drive assembly.
0007-8869

3.5.6 Developing Rotary Stopper Solenoid

3.5.6.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
[2]
[1]
[1]
[1]
F-3-638
[2] [1] [2]
[3]
F-3-639
F-3-640
Chapter 3
[2]
0007-8870
[2]
[1]
0007-8558
3-97