Dcnt Board; Removing The Rear Cover - Canon MF8100 Series Service Manual

[2]
9) Disconnect the connector [1] and the cable [2].
[2]
10) Disconnect the connector, remove the screw [2], and detach the fan [3]
together with cover.
[2] [3]
11) Remove the two screws [1], and detach the cable guide [2].
[1]
F-3-129
[1]
F-3-130
[1]
F-3-131
[2]
[1]
Never remove the SCNT board.

3.2.12 DCNT Board

3.2.12.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
4) Close the reader assembly; then, detach the rear cover[1].
Chapter 3
F-3-132
F-3-133
[1]
[3]
[2]
F-3-134
[4]
[5]
F-3-135
0007-7954
3-21