Removing The Scanner Cover Unit; Ccd Unit; Removing The Rear Cover; Removing The Scanner Unit - Canon MF8100 Series Service Manual

the operation panel [3].
[2]
[3]

3.3.3.6 Removing the Scanner Cover Unit

1) Remove the copyboard cover.
2) Remove the 2 screws [1].
3) Remove the 6 claws [2], and detach the scanner cover unit [3].
[1]
[2]

3.3.4 CCD Unit

3.3.4.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
[1] [2]
F-3-353
[3]
[2]
[2]
F-3-354
[1]
[3]
[2]
F-3-355
0007-8081
4) Close the reader assembly; then, detach the rear cover[1].
[3]
F-3-357

3.3.4.2 Removing the Scanner Unit

1) Remove the platen glass cover.
2) While removing the left and right claws, detach the hinge cover [1].
3) Remove the screw [2], and detach the cable guide [3].
0007-8095
4) Open the harness band [1], and free the 2 cables [2] connected to the
reader assembly.
5) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
[5]
F-3-356
[1]
[3]
[2]
[1]
[3]
[2]
F-3-358
[2]
[1]
[2]
F-3-359
Chapter 3
[4]
0007-8096
3-55