Operation Panel Unit; Removing The Rear Cover; Removing The Scanner Unit; Removing The Operation Panel - Canon MF8100 Series Service Manual

Chapter 3
3) Disconnect the 3 connectors [1], and remove the 8 screws [2]; then, detach
the main drive assembly [3].
[1]
[2]
[3]

3.2.10 Operation Panel Unit

3.2.10.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
4) Close the reader assembly; then, detach the rear cover[1].
3-18
[2]
[1]
[1]
[2]
F-3-105
[1]
[3]
[2]
F-3-106
[4]
[5]
F-3-107
[3]
F-3-108

3.2.10.2 Removing the Scanner Unit

1) Remove the platen glass cover.
2) While removing the left and right claws, detach the hinge cover [1].
3) Remove the screw [2], and detach the cable guide [3].
0007-8056
4) Open the harness band [1], and free the 2 cables [2] connected to the
reader assembly.
5) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
[1]

3.2.10.3 Removing the operation Panel

1) Remove the 2 screws [1], and free the 2 claws [2] (left/right) to open the
operation panel [3].
[1]
[3]
[2]
[1]
[3]
[2]
F-3-109
[2]
[1]
[2]
F-3-110
[2]
F-3-111
0007-8057
0007-8058