Removing The Power Supply Assembly; Removing The Face-Down Cover; Removing The Top Cover - Canon MF8100 Series Service Manual

Chapter 3

3.5.7.5 Removing the Power Supply Assembly

1) Remove the 6 screws [1], and detach the power supply assembly [2].
[1]
[1]

3.5.7.6 Removing the Face-Down Cover

1) Remove the 2 screws [1], and slide the face-down cover [2] in downward
direction to detach.

3.5.7.7 Removing the Top Cover

1) Remove the claw [1], and detach the ring gear [2].
2) Free the link lever [3] from the shaft [4].
3-104
[3]
[2]
[2]
F-3-680
[1]
[1]
F-3-681
[1]
[2]
F-3-682
3) Remove the 3 binding screws [1] and 2 TP screws [2]; then, disconnect
the connector [3], and detach the top cover [4].
0007-8645
[1]
0007-8666
When attaching the top cover, be sure to match its 2 positioners [1] and the
2 cut-offs [2] of the face-down sub cover, while making sure that the paper
retainer [3] is not blocking the feed path.
0007-8683
[3]
[4]
[1] [2]
F-3-683
[2]
[1]
[3]
F-3-684
[4]