Removing The Scnt Board Unit; Removing The Adf Unit; Removing The Operation Panel - Canon MF8100 Series Service Manual

Chapter 3
[2]
5) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
[1]

3.3.3.3 Removing the SCNT Board Unit

1) Remove the 8 screws [1] from behind the scanner unit, and shift up the
SCNT board unit [2].
[1]
[2]
2) Open the SCNT board unit; then, disconnect the 6 connectors [1] and the
3 flat cables [2].
[1]

3.3.3.4 Removing the ADF Unit

1) Open the ADF unit [1], and detach the stopper [2].
2) Remove the 3 claws [3], and detach the ADF front cover [4].
3-54
[2]
[1]
F-3-345
[2]
F-3-346
[1]
[1]
F-3-347
[2]
[2]
[1]
F-3-348
[3]
3) Remove the ferrite core [1] from behind the scanner unit; then, free the
harness from the tape [2].
4) Open the ADF unit [1] as shown; then, disengage it starting with the rear
0007-8078
and then the front.

3.3.3.5 Removing the operation Panel

1) Remove the 2 screws [1], and free the 2 claws [2] (left/right) to open the
operation panel [3].
0007-8079
2) Disconnect the 2 flat cables [1], and remove the 2 fastons [2]; then, detach
[1]
[4]
F-3-349
[1] [2]
F-3-350
[D]
[1]
[A]
[A] [B] [C]
F-3-351
[3]
[2]
F-3-352
[2]
[C]
[B]
0007-8080
[2]
[1]