Removing The Machine Inside Temperature Thermistor; Cooling Fan; Removing The Rear Cover; Removing The Reader Assembly - Canon MF8100 Series Service Manual

[2]
3.2.19.10 Removing the Machine Inside Temperature
Thermistor
1) Disconnect the connector [1], and remove the screw [2]; then, detach the
machine inside temperature thermistor [3].
[1]

3.2.20 Cooling Fan

3.2.20.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
[3] [1]
[2]
F-3-298
[2]
[3]
F-3-299
[1]
[3]
[2]
F-3-300
0007-8934
4) Close the reader assembly; then, detach the rear cover[1].
[3]
F-3-302

3.2.20.2 Removing the Reader Assembly

1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
0007-8559
When closing the reader assembly, be sure to push in the arm [1] first.
[4]
[5]
F-3-301
[1]
[3]
[2]
[1]
[1]
[2]
[2]
F-3-303
Chapter 3
0007-8577
3-47