Removing The Scanner Unit; Removing The Upper Right Cover; Upper Left Cover; Removing The Rear Cover - Canon MF8100 Series Service Manual

When closing the reader assembly, be sure to push in the arm [1] first.
[1]
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
[2]
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
[2]
5) Remove the 6 screws [1], and lift the reader unit to detach.
F-3-60
[1]
[3]
F-3-61
[2]
[1]
F-3-62
[1]
[1]

3.2.6.3 Removing the Scanner Unit

1) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
[1]

3.2.6.4 Removing the Upper Right Cover

1) Remove the 2 screws [1]; then, remove the 5 claws [2] to detach the upper
right cover [3].
[1]

3.2.7 Upper Left Cover

3.2.7.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
Chapter 3
[1]
F-3-63
[2]
F-3-64
[2]
[3]
[1]
[2]
F-3-65
0008-9843
0007-8490
0007-8499
3-11