Des Sensor; Removing The Adf Feed Sensor; Speaker; Removing The Rear Cover - Canon MF8100 Series Service Manual

3) Remove the 4 claws [1], and disconnect the connector [2]; then, detach the
ADF paper sensor [3].
[1]
[2]

3.3.12 DES Sensor

3.3.12.1 Removing the ADF Feed Sensor

1) Remove the stopper [1], and fully open the ADF unit [2].
2) Remove the 2 screws [1], and detach the ADF inside cover [2].
3) Free the harness [1] from the guide, and remove the screw [2]; then, detach
the sensor unit [3].
[2]
[1]
F-3-470
[3]
F-3-471
[2]
[1]
F-3-472
[2]
[1]
F-3-473
4) Disconnect the connector [1], and remove the 4 claws [4]; then, detach the
ADF feed sensor [3].

3.3.13 Speaker

3.3.13.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
0010-3733
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
4) Close the reader assembly; then, detach the rear cover[1].
[2] [3] [1]
F-3-474
[3]
[1]
[2]
F-3-475
[1]
[3]
[2]
F-3-476
[4]
[5]
F-3-477
Chapter 3
[2]
0007-8937
3-71