Removing The Rear Cover; Removing The Reader Assembly - Canon MF8100 Series Service Manual

Chapter 3
[1] [3]

3.2.17.2 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
4) Close the reader assembly; then, detach the rear cover[1].
3-34
[2] [1]
F-3-216
[1]
[3]
[2]
F-3-217
[4]
[5]
F-3-218
[3]
F-3-219

3.2.17.3 Removing the Reader Assembly

1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
0007-7935
When closing the reader assembly, be sure to push in the arm [1] first.
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
[1]
[3]
[2]
[1]
[1]
[2]
[2]
F-3-220
[1]
F-3-221
0007-8457