User Manual of DS-6300DI Decoder
5.2.3 Configuring Basic Network Settings
Purpose:
You can set the network parameters for the decoder in the parameter configure interface.
Steps:
Click Parameter ConfigureNetwork Parameters Basic Network Settings to enter the following interface:
1.
2.
Set the IP Address, Subnet Mask, Gateway Address, DNS Server, etc.
5.2.4 Configuring Alarm Input / Output Settings
Purpose:
As the Decoder is unable to obtain the alarm signal over network, it must be connected with external alarm
input/output.
Steps:
Alarm Input Settings
Click Parameter ConfigureAlarm Parameters Alarm Input Settings to enter the following interface:
1.
2.
Set the Alarm Mode for selected alarm input and configure the Alarm Input Handling. By default, the Alarm
Mode is in Normally Open.
42