Managing The Audio; Adjusting The System Volume - RADVision SCOPIA XT5000 Series User Manual

Managing the Audio

You can change the volume of calls, call ringing, and the volume of the microphone pod.
•
•
•

Adjusting the System Volume

When in a meeting, press
at your site.
To change the default speaker volume, perform the procedure in this section.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select the User settings tab.
Step 3
Select General under Call-Answer mode.
Step 4
Drag the Volume slider to set the value.
Step 5
Select Save.
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Adjusting the System Volume ................................................................ page 43
Adjusting the Ringing Volume ................................................................ page 44
Muting the Microphone Pod................................................................... page 44
+ or - on the XT Remote Control Unit to adjust the sound you hear
Figure 7-9 Call-Answer settings
Managing Calls and Videoconferences | 43