Fascia Installation - Valor 762 Installer And Owner Manual

INSTALLER GUIDE

16. FASCIA INSTALLATION

Blakely fascia - Refer to the two illustrations (See Fig 27) for guidance on the order in which the
fascia components are assemblied.
- Item A" Port Cover" should already be screw fixed in place as described in 14.4 (See Fig 25)
inside the roof of the fire box.
- Item B "Outlet Baffle" is screw fixed using 4 screws across the top front of the convector box, this
L shaped baffle must be mounted with the screws fixed above the horizontal flat section that
protrudes out from the face of the engine.
- Item C "Window Panel" is hung onto the front of the engine and secured (Ref. Figs 6 & 7).
- Item D "Window Cover" is then placed hanging onto the top of Item C.
- Item E "Outer Frame" is fixed using 6 screws (supplied) onto the main engine, with Item F "Inner
Frame" then secured by placing it into the outer frame Item E and releasing it down to slot in
place.
- Item G "Fret" is secured by locating the two rear screws into the locating slots in Item F. There
are two adjustable screws at the rear of the fret that can be adjusted to ensure the fret locates
securely.
B
F
D
G
E
A
C
Fig 27 - Fitting Blakely fascia
©
Page 33
GDC Group Ltd. 2013