Cleaning Your Fire; Metal And Painted Parts; Fascia; Removing And Cleaning The Window Assembly - Valor 762 Installer And Owner Manual

8. Turn the 'manual' knob to the ON, full counterclockwise
burner will now light on the max flame setting.
9. Turn main valve knob to the full 'ON' counterclockwise
10. If the appliance will not operate, follow the instructions "To Turn Off" below and
call the Valor Technical Helpline 0844 8711 554.
To turn off.
To turn the fire off press the 'ON/OFF' switch to the 'O' (Off position).
To maintain the high performance and quality finish of your fire please follow these
guidelines:
- Before attempting to clean the fire, please remember to turn off the fire and wait for
the appliance to cool completely. The fire will retain heat for some time before
cleaning can begin.
- If any pieces of debris are found in the convector box, have the chimney inspected
before further use.

Metal and painted parts.

- Clean the metal and painted parts with a slightly damp, lint free non-abrasive cloth
and then dry.
- Do not use abrasive cleaners, as these will scratch the fire surface.

Fascia.

DO wipe any spills off immediately to limit possibility of staining.
-
DO clean dust down regularly with a soft, clean brush and occasionally wipe over
with a soft damp cloth.
-
DO NOT use abrasive cleaners.
-
DO NOT allow any acids or oils to come in contact with the fascia (This includes
- cleaning solutions, vinegar, lemon juice, candle wax etc.).
DO NOT allow prolonged exposure to water.

Removing and cleaning the window assembly.

-
Removal of the window assembly is only necessary if you wish to clean the rear of
the window or access the ceramic components. The window assembly can be
cleaned with a mild detergent and water. Glass cleaner can also be used. Any stains
on the glass can be removed with a non-abrasive cleaner such as a ceramic hob
cleaner. Never use abrasive cleaners. Clean the window carefully in accordance with
the instructions supplied with the cleaner.
Before removing the fascia please read the following guide to manual handling.
This fascia is heavy. We therefore recommend that you use assistance if
required.
©
GDC Group Ltd. 2013
OWNER GUIDE

CLEANING YOUR FIRE

Page 49
position. The main
position.